Tips on Industrial Blower Safety

Be Conscious of People Around You

  • Industrial blowers are too high pressure so it cannot be handled by oneself.
  • Do not enter animals, peoples at mills, factories, and industries while using the industrial blower. It may whip up indoor dust and provides clean air.
  • If you are using the blower in your house, do not leave it on as young kids play together. This may result in one of several dangerous conditions.
  • Industrial Blower fittings should be at high altitudes so that nobody can touch it. The blades are too sharp to cut a hand.

To know about how to dress when fitting a blower at the mill or home check below.

Or you can visit ‘ and get info on industrial blower fittings’ (Also known as “ และรับข้อมูลเกี่ยวกับอุปกรณ์เป่าลมอุตสาหกรรม” in the Thai language) via online sources.

Dress Appropriately

  • The main things to wear when fitting a blower are goggles and earplugs.
  • When it’s dry out, it’s also a fantastic idea to wear a dust mask. Safeguarding your wellbeing is of extreme importance.
  • Wearing long pants and long sleeves that protect skin.
  • Wearing snug-fitting clothing enables you to move freely and never get anything caught in the moving parts of the blower

Utilise the Blower Correctly

  • Know how to run your equipment properly, i.e., starting, stopping, and running it. Understand how to prevent it immediately in the event of a crisis.
  • Blowers shouldn’t be utilized in-doors, nor if they are used while standing on a ladder or other comparable thing.

  • Don’t use the mill to disperse or mist compounds, fertilizers or other noxious substances.
  • Don’t change the mill or eliminate any security features like grounding hooks or knife guards.
  • Never use a plug in electrical blower whilst standing on any moist surface.

Care, Repair and Storage:

  • Switch the engine off and let it cool before adding additional gasoline. When adding gasoline, loosen the gasoline cap slowly to relieve pressure, then add the gasoline and then completely tighten the gas cap as soon as a finish.
  • Be sure that you are adding a suitable gas/fuel mixture. Before working on the mill, stop the engine and disconnect the spark plug cable.
  • Prior to storing your blower, then permit the motor to cool fully.